Доставка
Нова Пошта (Бесплатно при условии)
Оплата и гарантии
Наложенный платежСамовывоз
Оплата на счетIBAN UA623052990000026005011025975
Характеристики и описание
| Производитель | Barista |
|---|---|
| Страна производитель | Польша |
| Тип | Инструмент для полировки |
Products Description
Free Design Pen Similar Teeth Whitening Gel Home Kits
|
Name
|
Teeth Whitening Gel Kits
|
||
|
Time
|
30minitues
|
||
|
Material
|
Hydrogen Peroxide
|
||
|
Pack
|
3liquid+3powder per set
|
||
|
Type
|
Teeth Whitening
|
||
Features:
1. Apply a photocurable resin (gum protectant) to the gums, cover it to the underarm for 0.5 mm, and irradiate with a curing light for about 3 seconds.
2. Adjust the water agent and nano whitening powder into a paste (Note: slowly add the water to the powder to stir, the
consistency is to use the brush to pick up the whitening agent without dripping, not too thick) Apply the whitening agent A total of 16 or more tooth surfaces above and below, a thickness of about 2-3 mm.
3. Start the first 8 minutes of treatment with cold light whitening agent. After the end, absorb the whitening agent from the
tooth surface with a strong suction tube, and wipe the residual whitening agent in the teeth with a cotton ball or paper towel. Do not rinse with water at this time.
4. Repeat steps 2 and 3 for the second eight-minute session.
5. Usually two 8-minute treatments can see obvious results, but we recommend three treatments, which have achieved the best results.
6. If the patient responds to sensitive or painful teeth, stop the whitening operation.
7. After the whitening is finished, remove the whitening agent, carefully remove the photocurable resin, and rinse the teeth and teeth with water.
1. Apply a photocurable resin (gum protectant) to the gums, cover it to the underarm for 0.5 mm, and irradiate with a curing light for about 3 seconds.
2. Adjust the water agent and nano whitening powder into a paste (Note: slowly add the water to the powder to stir, the
consistency is to use the brush to pick up the whitening agent without dripping, not too thick) Apply the whitening agent A total of 16 or more tooth surfaces above and below, a thickness of about 2-3 mm.
3. Start the first 8 minutes of treatment with cold light whitening agent. After the end, absorb the whitening agent from the
tooth surface with a strong suction tube, and wipe the residual whitening agent in the teeth with a cotton ball or paper towel. Do not rinse with water at this time.
4. Repeat steps 2 and 3 for the second eight-minute session.
5. Usually two 8-minute treatments can see obvious results, but we recommend three treatments, which have achieved the best results.
6. If the patient responds to sensitive or painful teeth, stop the whitening operation.
7. After the whitening is finished, remove the whitening agent, carefully remove the photocurable resin, and rinse the teeth and teeth with water.
